Can I replace the handlebars on my motorbike

Yes, you can change the handlebars on your motorbike as the process is easy and can be done at home while at the garage. However, the process is often more complicated when the new handlebar is wider or higher than the original. As a result, this often requires a series of customization, especially to the components mounted on the bars.

Most of the disassembly and assembly process such as exchanging handlebar clamps and stock mirrors are oftexn an easier task. The difficulty, however, comes when you rearrange switch locations, change hydraulics, and plan to install new cables. Nonetheless, it would help if you did not worry about the process as we are going to have a look at the step by step tutorial on how you can change your motorcycle handlebar.

Get A New Handlebar from Motorbike Spares.

Before beginning the process of changing the handlebar then it is advised that you identify the diameter of your current bars vs the ones you would like to replace. To determine the diameter of the bars, then you’ll have to measure the handlebar by the clamps.
Purchasing a handlebar is mostly linked to the type of motorcycle you are having. However, most companies often use different bending styles while manufacturing their bars. For this reason, the diameter by the clamps can end up being less different from the actual clamp diameter.

Nevertheless, it would be best if you did not worry since this trend is only implemented by a few companies. As a result, there are multiple basic sizes out there, thus limiting the chances of getting the right bar. Lastly, it’s of great importance to know that handlebars can also be defined by its rise and sweep. However, this is often a personal preference for the handlebar product.
If you are having a problem finding a bar, then you can easily check with motorbike spares. Check out Fowlers they sell some of the best motorcycle spares around. 

Loosen the Controls and Remove the Bar.

The next step is then to loosen the controls by the bar. To do this, one has to remove the grips after that you have to remove the bar clamps. The bolts of the bar clamps are of different shapes. As a result, you’ll have to use a set of tools such as a spanner. However, if you are not equipped, then we have you covered as you can make an order from sportsbikeshop. Once done, however, you can then swap the controls between the bar to completely detach the handlebar. Also, clamps can either be a two-piece or either a single piece, depending on your motorbike.

Loosely Reinstall the Controls to The Bar and Re-clamp the Handlebar.

The next step, of course, is changing the handlebar with the new bar. Here, you’ll have to re-clamp the new handlebar to the bar and bolt them back in. To make the process more accurate, then you’ll have to work with the marks by the bar. On the other hand, if the new bar doesn’t have any marks, then you should make your markings by the centre of the new bar. Once done, you can now reinstall the controls back to the new handlebar. While at it, you’ll need to make adjustments to the controls in case your new bar was longer than the previous one. Read more about the adjustments from the following article.

Conclusion.

As seen above, it’s certainly possible to change you motorbike handlebars within a short time minus visiting a garage.

Leave a Reply